Solutions

Products & Equipment

Advantages of Studwelding

Eliminate Problems

All Product Menu

Contact Details

Studwelding offers Solutions - The NEW Way
	Replacing Inserts Studwelding replaced inserts in these applications, resulting in faster productions and stronger joints. Thinner sheets could now be used, and with no reverse marking. Corrosion was eliminated as moisture ingress was prevented.
	Replacing Drilling and Tapping Studwelding allowed this manufacturer to speed up production considerably. Previously he had to leak test every through drilled and tapped hole. An alternative solution of using thicker flanges would have resulted in additional time and cost implications
	Replacing Back Welding Here production increased tenfold when studwelding replaced a backwelding process. With no need to grind the top surface flat and polish off excess material and burn marks, time saved was significant ? reject components were eliminated with additional cost saving
	Replacing Through Bolting One component became tamper-proof, a clean design was the biggest benefit on another. One a third part, the gauge was reduced and leakage was prevented. Finally studwelding solved the problem of loose bolts and inaccessibility to the bolt head after assembly.
	Replacing Resistance Welding removed a bottleneck by not having to take the biggest component to a large resistance welding machine. Replacing soldering cured a corrosion problem caused by a solder flux. Some components which were previously brazed sustained damage because of the long heat cycle.
-------------------------------------------------------------------------------

Advantages | Eliminate Problems | Products | CD Studs | DA Studs

Home | Services | Equipment | Info

Copyright © 2003 ARCO StudWelding Limited. All Rights Reserved

Website Design & Management: Digital eBrochures

Eliminate Problems

Equipment & Accessories

THE SOLUTION: STUDWELDING

The benefits of this system are: Fast attachment.
No reverse marking.
The welded joint is stronger than the parent material or the stud.
Access is only required from one side.
No holes hence no leaking or weakening of the sheet.
Tamperproof.
Pre-coated or painted materials can be welded.
The equipment is portable and easily jigged.

In fact, Studwelding overcomes all of the disadvantages of the above processes.

-----------------------------------
This website designed and managed by:-
Digital eBrochures
Graphics & Design Studio.
Click here for details

ARCO Studwelding Limited

Quality Assurance